This Nylon Deep Groove Ball Bearing offers exceptional corrosion resistance and low friction for critical power transmission systems. Its robust construction ensures extended service life in demanding environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 82mm |
| Outside Diameter | 181mm |
| Width | 20mm |
Engineered for reliability and performance, this Deep Groove Ball Bearing features a precise 82mm inside diameter, a robust 181mm outside diameter, and a 20mm width. Constructed from high-grade nylon, it exhibits excellent chemical resistance, a low coefficient of friction, and superior electrical insulation properties, making it ideal for applications where lubrication is challenging or undesirable. The material's inherent toughness and vibration dampening capabilities contribute to reduced noise and extended operational lifespan in dynamic power transmission scenarios.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces are clean and free of debris. 2. Carefully press the bearing onto the shaft, applying even pressure to the inner ring only. 3. Secure the housing, ensuring proper alignment and avoiding excessive load on the bearing. 4. Rotate the shaft to verify smooth operation and check for any binding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft installation. | Always apply installation force to the inner ring when mounting onto the shaft to prevent damage to the bearing raceways and rolling elements. |
| Over-tightening housing components, causing preload. | Ensure housing components are tightened to the specified torque to avoid excessive preload, which can lead to premature bearing failure and increased operating torque. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Conveyor systems, Textile machinery, Food processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||