This Nylon Deep Groove Ball Bearing offers smooth, low-friction operation for light-duty power transmission. Its durable construction ensures reliable performance in a variety of industrial and consumer applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 16mm |
| Outside Diameter | 183mm |
| Width | 15mm |
Built to exacting engineering tolerances, this deep groove ball bearing features a precise 16mm inside diameter and a 183mm outside diameter, with a 15mm width. Constructed from high-performance nylon, it exhibits excellent wear resistance, low friction coefficients, and good chemical inertness. This material choice minimizes the need for lubrication in many applications and allows for quieter operation compared to traditional steel bearings. It is ideally suited for environments where corrosion resistance and reduced maintenance are paramount, and where moderate radial loads are expected.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Carefully align the bearing with the shaft and housing, applying even pressure. 3. Secure the bearing in place according to the specific application's design, avoiding excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation. | Use a proper bearing installer tool or apply even pressure on the inner ring to avoid damaging the bearing races or cage. |
| Incorrect shaft or housing fit. | Verify that the shaft and housing dimensions conform to the recommended tolerance for the bearing's inner and outer diameters. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Light-duty conveyor systems, Appliance components, Medical equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||