Engineered for optimal performance, this Deep Groove Ball Bearing features a lightweight yet robust nylon construction. Its precise dimensions ensure smooth, low-friction operation in diverse power transmission applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 11mm |
| Outside Diameter | 25mm |
| Width | 16mm |
Specified by design engineers worldwide, this Deep Groove Ball Bearing (11mm ID, 25mm OD, 16mm W) is manufactured from high-performance, wear-resistant nylon. This advanced polymer offers excellent chemical inertness, self-lubricating properties, and a reduced coefficient of friction compared to traditional metal bearings, making it ideal for environments where corrosion or lubrication is challenging. Its robust construction ensures reliable operation under moderate loads and speeds, minimizing vibration and noise.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing is clean and free of debris. Use a calibrated press or appropriate bearing installation tool to gently apply even pressure to the outer ring of the bearing. 2. Align the bearing squarely with the housing bore to prevent cocking and potential damage to the raceways. 3. Verify the bearing rotates freely by hand after installation. Avoid striking the bearing directly with excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the inner ring during press-fit installation into the housing. | Always apply force to the outer ring when pressing a bearing into a housing to avoid damaging the inner ring and cage. |
| Failing to ensure the housing bore is clean and dimensionally accurate. | Thoroughly clean the housing bore and verify its dimensions meet the specified tolerances before attempting installation to prevent binding or premature wear. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Conveyor systems, Small appliance motors, Material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||