This 10mm ID x 184mm OD x 12mm W deep groove ball bearing, constructed from high-performance nylon, offers a lightweight, corrosion-resistant, and exceptionally quiet solution for demanding power transmission needs.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 10mm |
| Outside Diameter | 184mm |
| Width | 12mm |
Engineered for reliability and performance, this deep groove ball bearing features a 10mm internal diameter, a substantial 184mm external diameter, and a 12mm width. Constructed from a specialized industrial-grade nylon, it excels in applications requiring reduced weight, inherent corrosion resistance, and low-friction, silent operation. The polymer construction mitigates the need for lubrication in many environments and provides good electrical insulation properties. This makes it ideal for moderate load conditions where metal bearings may be susceptible to environmental degradation or noise concerns.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free of debris. 2. Carefully press the bearing into the housing, ensuring an even fit. 3. Verify smooth rotation after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening during press-fit installation. | Apply gradual, even pressure to avoid deforming the nylon race or balls. |
| Exposing the bearing to excessive heat or aggressive chemicals. | Consult material compatibility charts to ensure the nylon is suitable for the operating environment. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Light-duty conveyor systems, Automated equipment guides, Consumer electronics components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||