Engineered for robust sealing, this industrial O-ring features a durable Buna-N elastomer reinforced with Nylon for enhanced mechanical strength and improved extrusion resistance in demanding environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 5.550" |
| Outside Diameter | 8.853" |
| Cross Section | 0.084" |
Built to exacting engineering tolerances, this Buna-N O-ring exhibits an Inside Diameter of 5.550 inches, an Outside Diameter of 8.853 inches, and a precise 0.084-inch cross-section. The Buna-N (Nitrile) material provides excellent resistance to oils, fuels, and hydraulic fluids, while the integrated Nylon reinforcement significantly enhances its tensile strength and resistance to extrusion under high pressure and temperature conditions. This combination makes it ideal for static and dynamic sealing applications where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free from debris. 2. Carefully position the O-ring within its groove, avoiding stretching or twisting. 3. Apply a thin, compatible lubricant to facilitate assembly and prevent damage during installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Always use the correct size O-ring for the groove and avoid unnecessary stretching. If the O-ring is difficult to install, re-evaluate the groove dimensions or consider a lubricant. |
| Using incompatible lubricants or cleaning agents. | Consult the material compatibility chart for Buna-N and Nylon to ensure chosen lubricants and cleaning agents will not degrade the O-ring material. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic systems, Pneumatic equipment, Automotive engine seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||