This industrial O-ring, crafted from robust Buna-N and reinforced with Nylon, provides exceptional sealing integrity. Engineered for precise fits, it ensures reliable performance in critical fluid and gas containment systems.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 3.163" |
| Outside Diameter | 4.113" |
| Cross Section | 0.118" |
Trusted by engineers across multiple sectors, this Buna-N O-ring with a Nylon reinforcement offers superior resistance to abrasion, compression set, and a wide range of chemicals. Its precise dimensions, featuring an Inside Diameter of 3.163", an Outside Diameter of 4.113", and a Cross Section of 0.118", guarantee a secure and leak-proof seal in demanding environments. The combination of Buna-N's excellent resilience and Nylon's structural support makes it ideal for hydraulic systems, pneumatic assemblies, and general industrial fluid handling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free from debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Gently seat the O-ring into its designated groove, ensuring it is not twisted or pinched.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Gently stretch and guide the O-ring into place, utilizing appropriate lubrication if necessary. |
| Installing on a dirty or damaged groove, compromising the seal. | Thoroughly inspect and clean the groove before installation. |
| O-ring being twisted or pinched during installation. | Ensure the O-ring is properly seated and lies flat within the groove. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic Systems, Pneumatic Assemblies, Fluid Power Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||