This M9x74mm Nylon Hex Head Cap Screw offers a durable and lightweight fastening solution. Its non-corrosive and non-conductive properties make it ideal for demanding environments where traditional metal fasteners may fail.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M9 |
| Length | 74mm |
| Head Width | 18mm |
Engineered for reliability and performance, this M9x74mm Hex Head Cap Screw is manufactured from high-grade Nylon, providing excellent chemical resistance and electrical insulation. The M9 thread size ensures secure mating with M9 nuts and tapped holes, while the 74mm length offers substantial grip. The 18mm head width provides ample bearing surface for torque application without damaging the substrate. Its inherent flexibility helps absorb vibration and shock, making it suitable for applications requiring reduced noise and wear.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate M9 nut or tapped hole for the 74mm length screw. 2. Insert the Hex Head Cap Screw, ensuring threads engage smoothly. 3. Tighten using a suitable wrench on the 18mm hex head to the desired torque, avoiding over-tightening to prevent thread stripping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M9 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M9 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread damage or head deformation. | Use a torque wrench and adhere to recommended torque values for nylon fasteners, or tighten until snug and a slight resistance is felt. |
| Using the screw in environments exceeding nylon's temperature or chemical resistance limits. | Verify the operating environment's temperature and chemical compatibility with nylon before installation. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and panels, Chemical processing equipment, Marine and outdoor applications, Medical devices.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||