High-strength M9x48mm hex head cap screw crafted from corrosion-resistant Aluminum 6061. Ideal for applications requiring a balance of strength, light weight, and durability.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Size | M9 |
| Length | 48mm |
| Head Width | 27mm |
Manufactured under strict quality controls, this M9x48mm hex head cap screw is precision-engineered from Aerospace-grade Aluminum 6061. Known for its excellent corrosion resistance, good strength-to-weight ratio, and weldability, it is suitable for a wide range of environments. The M9 thread provides secure fastening, while the 48mm length offers ample grip. The substantial 27mm head width ensures effective torque application and load distribution, making it a reliable choice for structural and mechanical assemblies where weight reduction is critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean threaded hole and fastener threads to remove debris. 2. Insert the hex head cap screw into the mating component. 3. Tighten using an appropriate wrench to the specified torque value, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M9 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M9 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening Aluminum fasteners, leading to thread stripping or material deformation. | Consult torque charts specific to Aluminum 6061 and the thread size (M9), and use a calibrated torque wrench. |
| Using incompatible materials in direct contact, potentially causing galvanic corrosion. | Ensure mating components are compatible with Aluminum 6061 or employ isolation methods like washers or coatings. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace components, Marine structures, Automotive assemblies, Lightweight industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||