This M9x42mm Hex Head Cap Screw, crafted from aerospace-grade Titanium Grade 5, offers superior strength-to-weight ratio and exceptional corrosion resistance. Engineered for demanding environments.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Size | M9 |
| Length | 42mm |
| Head Width | 24mm |
A high-performance industrial component, this Hex Head Cap Screw is meticulously manufactured from Titanium Grade 5 (Ti-6Al-4V), renowned for its excellent tensile strength, fatigue resistance, and biocompatibility. Measuring M9 in nominal diameter and 42mm in length, it features a precisely machined hex head with a 24mm width for optimal torque application using standard tooling. Its inherent resistance to corrosion makes it ideal for use in aggressive chemical, marine, and high-temperature environments where traditional steel fasteners would degrade.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-tighten the screw to engage threads properly. 3. Use an appropriately sized hex wrench to tighten to the specified torque, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M9 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M9 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive torque, leading to thread stripping or fastener fatigue. | Consult material specifications or engineering drawings for the correct torque value and use a calibrated torque wrench. |
| Not verifying thread compatibility between the screw and the mating component. | Confirm that the M9 thread pitch and form match the receiving thread precisely before installation. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine and offshore equipment, Medical implants and surgical instruments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||