Engineered for demanding environments, this M9x37mm Hex Head Cap Screw is crafted from high-performance Titanium Grade 5. Its exceptional strength, lightweight nature, and superior corrosion resistance make it ideal for critical applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Size | M9 |
| Length | 37mm |
| Head Width | 32mm |
Specified by design engineers worldwide, this M9x37mm Hex Head Cap Screw is manufactured from Aerospace Grade Titanium (Ti-6Al-4V), offering an unparalleled strength-to-weight ratio with excellent tensile and yield strength. The M9 thread size and 37mm length provide robust fastening capabilities, while the expansive 32mm head width ensures secure torque application and load distribution. This material's inherent biocompatibility and resistance to galvanic corrosion make it a prime choice for applications exposed to harsh chemicals, extreme temperatures, and saline environments, including marine hardware, medical implants, and high-performance automotive and aerospace assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Apply a small amount of anti-seize compound to the threads, especially in corrosive environments. 3. Tighten the hex head cap screw to the specified torque using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M9 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M9 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening due to insufficient torque control. | Always use a calibrated torque wrench and adhere to manufacturer-specified torque values to prevent thread stripping or fastener failure. |
| Using standard steel tools which can gall or damage the titanium head. | Utilize high-quality tools specifically designed for titanium fasteners to prevent galling and ensure proper engagement. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Marine hardware and offshore equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||