Engineered for exceptional strength-to-weight ratio and superior corrosion resistance, this M9x26mm Hex Head Cap Screw is manufactured from premium Titanium Grade 5 (Ti-6Al-4V). Ideal for critical load-bearing applications where performance and durability are paramount.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Size | M9 |
| Length | 26mm |
| Head Width | 18mm |
Purpose-built for heavy-duty applications, this M9x26mm Hex Head Cap Screw boasts an M9 thread diameter and a 26mm length, ensuring robust material engagement. The head width measures 18mm, providing ample surface area for torque application. Fabricated from Titanium Grade 5 (Ti-6Al-4V), this fastener exhibits an impressive tensile strength of approximately 895 MPa and a yield strength around 827 MPa. Its biocompatibility and remarkable resistance to corrosive environments make it indispensable in aerospace, medical implants, marine, and high-performance automotive sectors where weight reduction and extreme durability are non-negotiable.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Apply a suitable lubricant or anti-seize compound if specified by the application. 3. Hand-tighten the screw initially to engage threads properly, then use a calibrated torque wrench to achieve the specified torque value for the application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M9 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M9 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, leading to thread stripping or fastener failure. | Always adhere to the manufacturer's recommended torque specifications, utilizing a calibrated torque wrench. |
| Using dissimilar metals in contact without proper isolation, potentially causing galvanic corrosion. | Employ appropriate washers or coatings to insulate titanium screws from less noble metals in corrosive environments. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, High-performance automotive engine and chassis applications, Marine hardware and subsea equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||