Engineered from high-strength nylon, this M9x142mm hex head cap screw offers exceptional corrosion resistance and dielectric properties. Its robust design ensures reliable fastening in demanding environments, providing a lightweight alternative to metal fasteners.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M9 |
| Length | 142mm |
| Head Width | 7mm |
Purpose-built for heavy-duty applications, this M9x142mm hex head cap screw is manufactured from a high-performance nylon polymer, offering superior resistance to a wide range of chemicals, solvents, and moisture. The M9 thread size ensures robust mechanical engagement, while the 142mm length provides ample fastening reach. With a head width of 7mm, it is compatible with standard hex drivers. The inherent insulating properties of nylon make it ideal for applications where electrical conductivity must be avoided, such as in sensitive electronic assemblies or around high-voltage equipment. Its lightweight nature also contributes to reduced overall assembly weight.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate M9 hex driver for the screw head. 2. Align the screw with the pre-tapped hole or mating component. 3. Apply consistent, steady torque to tighten the screw until snug, avoiding overtightening to prevent thread stripping or material deformation. 4. Verify secure fastening by checking for any wobble or movement.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M9 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M9 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening, which can strip the nylon threads or deform the screw head. | Use a torque wrench set to the recommended torque for nylon fasteners, or tighten until snug and then apply an additional quarter turn. |
| Using metal tools that can damage the nylon head or threads. | Always use appropriate nylon or plastic-compatible tools for installation and removal. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Medical equipment and devices, Corrosive chemical processing environments, Lightweight structural assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||