Engineered from aerospace-grade Titanium Grade 5, this M9x141mm hex head cap screw offers superior strength-to-weight ratio and exceptional corrosion resistance for demanding applications.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Size | M9 |
| Length | 141mm |
| Head Width | 35mm |
Precision-manufactured to tight tolerances, this M9x141mm hex head cap screw features a substantial 35mm head width for optimal torque transfer. Constructed from Titanium Grade 5 (Ti-6Al-4V), it exhibits an impressive tensile strength exceeding 900 MPa and a low density of approximately 4.43 g/cm³. This combination of mechanical properties ensures high performance and longevity in corrosive environments. The material is biocompatible and non-magnetic, making it ideal for critical assemblies where material integrity and performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply a suitable anti-seize compound if required by the application environment. 3. Tighten the M9x141mm hex head cap screw to the specified torque using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M9 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M9 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-torquing the fastener, leading to thread stripping or material fatigue. | Always adhere to the recommended torque specifications for the specific application and materials being joined. |
| Using incompatible lubricants or anti-seize compounds that can react with titanium. | Consult material compatibility charts and use only titanium-specific or recommended anti-seize compounds. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and instrumentation, Marine and offshore equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||