This M9x122mm Hex Head Cap Screw, crafted from premium Aluminum 6061, offers superior corrosion resistance and a high strength-to-weight ratio. Ideal for applications where weight reduction and durability are paramount.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M9 |
| Length | 122mm |
| Head Width | 16mm |
Engineered for reliability and performance, this M9x122mm Hex Head Cap Screw features a nominal thread diameter of 9mm and an overall length of 122mm. The head width measures 16mm, providing adequate surface area for torque application. Constructed from Aluminum 6061, this fastener exhibits excellent corrosion resistance, good machinability, and a favorable strength-to-weight ratio, making it suitable for marine environments, aerospace components, and general structural applications where weight savings are critical. Its compliance with relevant industry standards ensures consistent performance and interchangeability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate torque wrench calibrated to the recommended torque specification for M9 Aluminum 6061 fasteners. 2. Ensure the mating threads are clean and free from debris to prevent galling. 3. Thread the cap screw into the receiving component, applying steady, even torque until the desired tightness is achieved, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M9 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M9 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the aluminum screw, which can lead to thread stripping or deformation. | Utilize a calibrated torque wrench and adhere to recommended torque values for aluminum fasteners to prevent damage. |
| Using the wrong tool size, potentially damaging the hex head and hindering proper torque application. | Always use a properly sized hex driver or wrench that fits snugly to the head of the cap screw. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Marine equipment and fittings, Lightweight automotive assemblies, Electronic enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||