Engineered for demanding environments, this M9 x 89mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and electrical insulation. Its robust construction ensures reliable fastening in a wide array of industrial and commercial applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M9 |
| Length | 89mm |
| Head Width | 15mm |
Specified by design engineers worldwide, this M9 x 89mm Nylon Hex Head Cap Screw features a nominal diameter of M9 and a total length of 89mm. The head boasts a 15mm width, providing ample surface area for torque application. Fabricated from high-performance nylon, it exhibits excellent chemical resistance, a high strength-to-weight ratio, and inherent dielectric properties. This makes it ideal for applications where electrical insulation or resistance to corrosive substances is critical, such as in electronics assembly, chemical processing equipment, and marine environments. The material's low friction coefficient also aids in assembly.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate M9 hex socket wrench or driver. 2. Thread the screw into the pre-tapped hole or nut, ensuring smooth engagement. 3. Tighten to the recommended torque specification for nylon fasteners, avoiding overtightening to prevent thread stripping or material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M9 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M9 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nylon screw. | Use a torque wrench set to the manufacturer's recommended torque for nylon fasteners to prevent thread damage and maintain material integrity. |
| Using in applications exceeding temperature limits. | Verify the operating temperature range of nylon fasteners and ensure it aligns with the application's environmental conditions. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and components, Chemical processing equipment, Automotive assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||