This M9 x 23mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and lightweight strength. Engineered for demanding environments, it provides reliable fastening solutions for a variety of industrial and consumer applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M9 |
| Length | 23mm |
| Head Width | 9mm |
Manufactured under strict quality controls, this M9 x 23mm Nylon Hex Head Cap Screw features a nominal diameter of M9 and a length of 23mm, with a head width of 9mm. Constructed from high-performance nylon, it exhibits excellent dielectric strength, chemical resistance to solvents and mild acids, and a wide operating temperature range. Its non-conductive properties make it ideal for electrical insulation and environments where galvanic corrosion is a concern. The hex head design allows for secure tightening with standard tools.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating threaded hole or nut. 2. Insert the M9 x 23mm Nylon Hex Head Cap Screw into the desired location. 3. Tighten using a 9mm hex driver or wrench until snug, avoiding overtightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M9 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M9 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nylon screw, leading to thread stripping or head deformation. | Apply only sufficient torque to achieve a secure connection. Refer to torque charts for nylon fasteners if precise tension is required. |
| Using in applications requiring high shear or tensile strength beyond nylon's capabilities. | Evaluate load requirements and select a fastener material (e.g., stainless steel, alloy steel) with appropriate mechanical properties for the application. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and insulation, Automotive components and trim, Marine hardware and fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||