This M9 x 14mm Nylon Hex Head Cap Screw provides robust fastening with excellent dielectric properties and resistance to corrosion. Ideal for environments where metal fasteners are unsuitable.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M9 |
| Length | 14mm |
| Head Width | 14mm |
Engineered for reliability and performance, this M9 x 14mm Hex Head Cap Screw is manufactured from high-grade Nylon, ensuring superior chemical resistance to solvents, oils, and most acids. Its non-conductive nature makes it an ideal choice for electrical and electronic assemblies, preventing short circuits and galvanic corrosion. The M9 thread size and 14mm length offer precise integration into pre-tapped holes or with mating nuts, while the 14mm head width provides ample surface area for tool engagement and load distribution. This fastener is designed for applications requiring lightweight, durable, and non-metallic solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threaded hole or nut is clean and free of debris. 2. Hand-thread the Nylon Hex Head Cap Screw into the receiving component until snug. 3. Tighten the screw using an appropriate metric wrench or socket on the hex head, applying consistent torque to achieve a secure connection without over-stressing the nylon material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M9 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M9 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, which can strip the threads or crack the head. | Apply gradual torque and stop when the screw is firmly seated. Avoid excessive force, especially in softer materials. |
| Using the wrong size tool, leading to damage of the hex head and difficulty in installation/removal. | Always use a correctly sized metric wrench or socket (14mm for this M9 screw) that fits snugly on the hex head. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Medical equipment assemblies, Corrosive chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||