This M9 x 114mm Hex Head Cap Screw, crafted from robust Aluminum 6061, offers superior corrosion resistance and excellent strength-to-weight ratio. Engineered for demanding industrial environments and critical fastening applications.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Size | M9 |
| Length | 114mm |
| Head Width | 19mm |
A proven choice for industrial professionals, this M9 x 114mm Hex Head Cap Screw features a nominal diameter of M9 and a total length of 114mm. The head width is precisely engineered to 19mm, ensuring compatibility with standard tooling. Constructed from Aluminum 6061, it boasts exceptional corrosion resistance, good formability, and a high tensile strength of approximately 310 MPa, making it ideal for applications where weight reduction and environmental resilience are paramount. Its non-magnetic properties and suitability for low-temperature environments further enhance its versatility.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-thread the screw to start, verifying proper engagement. 3. Torque to the manufacturer's recommended specification using a calibrated torque wrench, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M9 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M9 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force, leading to thread stripping or fastener deformation. | Always adhere to the specified torque values for Aluminum 6061 fasteners and use a calibrated torque wrench. |
| Not cleaning mating threads, which can hinder proper engagement and torque application. | Thoroughly clean both the screw and the receiving threads before assembly to ensure optimal performance. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace components, Marine hardware, Automotive sub-assemblies, Lightweight structural applications, Corrosive environment assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||