Engineered for resilience, this M8x99mm Nylon Hex Head Cap Screw offers exceptional resistance to chemicals and corrosion. Its lightweight, non-conductive properties make it ideal for specialized industrial and electronic applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Size | M8 |
| Length | 99mm |
| Head Width | 8mm |
Specified by design engineers worldwide, this M8x99mm Nylon Hex Head Cap Screw is manufactured from high-performance polyamide, offering superior dielectric strength and excellent resistance to a broad spectrum of chemicals, including acids, alkalis, and solvents. The M8 thread pitch and 99mm length provide robust fastening capabilities, while the 8mm hex head ensures reliable torque application with standard tooling. Its non-magnetic and lightweight nature makes it a preferred choice for sensitive electronic assemblies, medical equipment, and environments where galvanic corrosion is a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate wrench or socket for the 8mm hex head. 2. Engage the screw with the pre-drilled or tapped hole. 3. Tighten to the required torque, avoiding over-tightening to prevent thread stripping or material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M8 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M8 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread damage or head stripping. | Utilize a torque wrench and adhere to recommended torque specifications for nylon fasteners to prevent over-stressing the material. |
| Using the screw in applications exceeding its temperature or load-bearing limits. | Consult the material data sheet for the specific polyamide's temperature range and tensile strength to ensure suitability for the intended application. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical insulation and grounding systems, Chemical processing equipment and pipelines, Food and beverage processing machinery, Medical device assembly, Marine and offshore environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||