Engineered from aerospace-grade Titanium Grade 5, this M8x16mm hex head cap screw offers exceptional strength-to-weight ratio and superior corrosion resistance for demanding industrial environments.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Size | M8 |
| Length | 16mm |
| Head Width | 21mm |
A proven choice for industrial professionals, this M8x16mm Hex Head Cap Screw is meticulously manufactured from Titanium Grade 5 (Ti-6Al-4V), a dual-phase alloy renowned for its excellent mechanical properties. With a minimum tensile strength of 895 MPa and yield strength of 827 MPa, it provides robust fastening solutions in corrosive environments where weight is a critical consideration. The M8 thread provides reliable engagement, while the 16mm length offers moderate reach. The 21mm head width ensures effective torque application with standard tools, making it suitable for applications in aerospace, medical implants, marine hardware, and high-performance automotive assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-thread the screw to confirm proper alignment and prevent cross-threading. 3. Tighten the screw to the manufacturer's recommended torque specification using an appropriate torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M8 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M8 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the fastener. | Always use a calibrated torque wrench and adhere to the specified torque values to prevent thread stripping or material fatigue. |
| Using a lubricant not compatible with titanium. | Consult material compatibility charts to ensure the chosen lubricant does not react with titanium, which could lead to galling or corrosion. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Marine hardware and offshore equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||