This M8x116mm Hex Head Cap Screw, crafted from corrosion-resistant Aluminum 6061, offers a lightweight yet robust fastening solution. Its precise dimensions and superior material properties ensure secure and reliable joining in critical applications.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Size | M8 |
| Length | 116mm |
| Head Width | 20mm |
Precision-manufactured to tight tolerances, this M8 Hex Head Cap Screw measures 116mm in length with a 20mm head width. Fabricated from Aluminum 6061, it exhibits excellent strength-to-weight ratio, superior corrosion resistance, and good machinability, making it ideal for aerospace, automotive, and marine environments. Its non-magnetic properties and suitability for anodizing further enhance its versatility. Designed for use with M8 nuts and tapped holes, it provides a secure mechanical connection where weight and environmental durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads and the screw's threads are clean and free of debris. 2. Insert the screw into the pre-drilled or tapped hole. 3. Tighten the screw using an appropriate wrench or socket, applying torque according to design specifications or industry best practices, ensuring not to overtighten.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M8 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M8 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive torque on aluminum fasteners. | Always refer to torque specifications for aluminum 6061 fasteners to prevent stripping threads or deforming the material. |
| Not checking for thread contamination before installation. | Thoroughly inspect both the screw and mating threads for any dirt, debris, or damage that could compromise the connection. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Automotive interior and exterior trim, Marine hardware and fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||