Engineered from aerospace-grade Titanium Grade 5, this M8x115mm hex head cap screw offers exceptional strength-to-weight ratio and superior corrosion resistance for critical applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Size | M8 |
| Length | 115mm |
| Head Width | 36mm |
Built to exacting engineering tolerances, this M8x115mm hex head cap screw features a substantial 36mm head width for enhanced torque application and load distribution. Fabricated from Titanium Grade 5 (Ti-6Al-4V), it delivers a minimum tensile strength of 895 MPa and a yield strength of 828 MPa, while maintaining excellent biocompatibility and resistance to saltwater, chloride, and various chemical environments. The inherent lightweight nature of titanium (approximately 45% the density of steel) makes it ideal for weight-sensitive assemblies without compromising structural integrity. Its wide operating temperature range further expands its utility in demanding industrial and aerospace sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mating surfaces and screw threads. 2. Apply a suitable anti-seize compound if specified for the application. 3. Thread the cap screw into the designated receptacle, ensuring smooth engagement without cross-threading. 4. Tighten to the manufacturer's recommended torque specification using a calibrated torque wrench, ensuring even pressure and avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M8 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M8 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel tools which can damage the titanium threads. | Utilize high-quality tools specifically designed for titanium fasteners, ensuring proper fit and preventing galling or stripping. |
| Over-tightening the fastener, potentially leading to thread damage or compromising the material's integrity. | Always adhere to the specified torque values for the application, using a calibrated torque wrench for precise control. |
| Applying excessive force without proper lubrication, increasing the risk of galling. | Use a compatible anti-seize compound designed for titanium fasteners to facilitate smooth installation and prevent seizing. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine and offshore equipment, Medical implants and surgical instruments, High-performance automotive and motorsport, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||