This M8 x 73mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and a lightweight, high-strength solution for industrial fastening. Its robust nylon construction ensures reliable performance in challenging environments, making it ideal for a wide range of assembly needs.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M8 |
| Length | 73mm |
| Head Width | 23mm |
A high-performance industrial component, this M8 x 73mm Hex Head Cap Screw is precision-engineered from durable, high-density nylon. Featuring a nominal metric thread size of M8 and a substantial length of 73mm, it provides secure fastening with a generous 23mm head width for effective torque application. The inherent properties of nylon, including excellent electrical insulation, chemical resistance, and a broad operating temperature range, make this fastener suitable for applications where metal alternatives may fail due to environmental factors, galvanic corrosion, or weight constraints.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Insert the M8 Nylon Hex Head Cap Screw into the pre-drilled or tapped hole. 2. Using an appropriate hex wrench or socket of size 23mm, engage the head of the screw. 3. Apply controlled torque to tighten the screw until secure, avoiding overtightening which can strip the nylon threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M8 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M8 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive torque, leading to thread stripping or head deformation. | Apply appropriate torque based on the nylon's tensile strength and the application's requirements. Refer to torque charts if available or use a torque wrench for precision. |
| Using the wrong size hex wrench, potentially damaging the head or failing to achieve proper tightening. | Ensure the hex wrench or socket precisely matches the 23mm head width of the cap screw. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Corrosive chemical processing equipment, Lightweight structural assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||