Engineered for corrosion resistance and lightweight applications, this M8 x 53mm Nylon Hex Head Cap Screw offers superior performance in demanding industrial settings. Its non-conductive properties make it ideal for sensitive environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Size | M8 |
| Length | 53mm |
| Head Width | 9mm |
Designed for demanding industrial environments, this M8 x 53mm Nylon Hex Head Cap Screw features a nominal diameter of M8, a shank length of 53mm, and a head width of 9mm. Constructed from high-grade nylon, it exhibits excellent resistance to chemicals, moisture, and corrosion, making it suitable for harsh operational conditions. Its inherent non-conductive and non-magnetic properties further enhance its utility in electrical, electronics, and sensitive assembly applications. The hex head design allows for secure tightening with standard tools, ensuring reliable fastening.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating component with an M8 threaded hole. 2. Insert the Nylon Hex Head Cap Screw into the hole. 3. Tighten securely using a suitable wrench or socket, avoiding overtightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M8 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M8 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nylon screw, leading to thread stripping or head deformation. | Apply moderate torque during installation. Refer to torque charts for nylon fasteners if precise values are required. |
| Using in applications requiring high tensile strength or significant load-bearing capacity. | For high-strength requirements, consider metallic fasteners. Nylon is best suited for moderate loads and environments where its specific properties are advantageous. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electronics assembly and enclosures, Chemical processing equipment, Marine and offshore environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||