Engineered from robust nylon, this M8 x 28mm hex head cap screw offers excellent corrosion resistance and electrical insulation, making it ideal for challenging industrial applications where metal fasteners may fail.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M8 |
| Length | 28mm |
| Head Width | 8mm |
Designed for demanding industrial environments, this M8 x 28mm nylon hex head cap screw (head width 8mm) provides superior resistance to corrosive chemicals, solvents, and moisture. Its non-conductive properties make it essential for electrical assemblies and environments where stray currents are a concern. The lightweight yet durable nylon construction ensures a secure hold without the risk of galvanic corrosion, offering a reliable fastening solution for applications in the electronics, automotive, and chemical processing industries. Tensile strength and operating temperature limits should be considered based on specific application loads and environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate torque wrench and socket for M8 hex head. 2. Carefully thread the nylon cap screw into the pre-tapped hole or mating fastener, ensuring proper alignment. 3. Apply controlled torque to secure the assembly, avoiding over-tightening which can strip the nylon threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M8 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M8 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread stripping or head deformation. | Use a calibrated torque wrench to apply the recommended torque, or tighten by feel, stopping when snug. |
| Using the nylon screw in high-temperature or high-load applications beyond its material capabilities. | Verify the operating temperature range and tensile strength requirements of the application against the nylon screw's specifications before installation. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and panel mounting, Chemical processing equipment, Light-duty structural assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||