This M8 x 17mm brass hex head cap screw offers superior corrosion resistance and electrical conductivity. Its robust design ensures reliable fastening in demanding industrial applications, providing a secure and visually appealing connection.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Size | M8 |
| Length | 17mm |
| Head Width | 35mm |
A proven choice for industrial professionals, this M8 x 17mm brass hex head cap screw (35mm head width) is engineered for environments where corrosion resistance is paramount. Brass alloys provide excellent natural corrosion resistance, making them ideal for marine, chemical processing, and outdoor applications. The material's inherent non-magnetic properties and good electrical conductivity also lend themselves to specialized electrical and electronic assemblies. Its substantial head width offers increased surface area for load distribution, enhancing joint integrity. Compliance with relevant dimensional standards ensures interchangeability and ease of integration into existing systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Hand-thread the cap screw to verify alignment and prevent cross-threading. 3. Tighten the cap screw using an appropriate wrench to the manufacturer's recommended torque specification.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M8 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M8 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the brass screw, leading to thread stripping. | Utilize a torque wrench and adhere to recommended torque values for brass fasteners to prevent damage. |
| Using in highly abrasive environments without considering material wear. | For high-abrasion applications, consider alternative hardened steel or coated fasteners. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Electrical connectors and enclosures, Architectural and decorative fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||