Engineered for demanding environments, this M8 x 13mm Hex Head Cap Screw utilizes Titanium Grade 5 for exceptional strength-to-weight ratio and superior corrosion resistance.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M8 |
| Length | 13mm |
| Head Width | 14mm |
Precision-manufactured to tight tolerances, this M8 x 13mm Hex Head Cap Screw features a 14mm hex head for secure torque application. Constructed from Titanium Grade 5 (Ti-6Al-4V), it offers a tensile strength of approximately 950 MPa and a yield strength of 880 MPa, with excellent fatigue resistance and immunity to saltwater corrosion. This makes it ideal for applications where weight reduction and high performance under extreme conditions are critical, such as in aerospace structural components, marine hardware, and advanced medical implants.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Apply a light coat of anti-seize compound if required by the application environment. 3. Tighten the screw to the manufacturer's specified torque using an appropriate hex driver or wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M8 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M8 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening, leading to thread stripping or fastener failure. | Adhere strictly to recommended torque specifications, using a calibrated torque wrench. |
| Using incompatible tools, causing head damage or improper engagement. | Utilize a properly sized hex socket or wrench that fits the head snugly. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural assemblies, Marine and offshore equipment, High-performance automotive components, Medical implants and surgical instruments, Corrosive chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||