Engineered for demanding environments, this M8 x 122mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and electrical insulation. Its robust nylon construction ensures reliability in corrosive or electrically sensitive applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M8 |
| Length | 122mm |
| Head Width | 14mm |
Purpose-built for heavy-duty applications, this M8 x 122mm Nylon Hex Head Cap Screw is manufactured from high-strength, chemically resistant nylon. The M8 thread size provides robust fastening capabilities, while the 122mm length offers ample reach for various assemblies. With a head width of 14mm, it ensures sufficient bearing surface for secure tightening. Nylon's inherent properties include excellent dielectric strength, low friction, and resistance to a wide range of chemicals, making it ideal for environments where metal fasteners would degrade or pose an electrical hazard. Its lightweight nature also contributes to overall assembly efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate mating hardware, ensuring thread compatibility. 2. Hand-tighten the screw to initiate thread engagement. 3. Use a standard hex wrench to tighten the screw to the desired torque, avoiding overtightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M8 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M8 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening nylon fasteners | Tighten only to the point of snugness. Over-torque can strip threads or deform the screw head and mating component. |
| Using in high-temperature applications beyond nylon's limit | Verify the operating temperature range of nylon (typically up to 100-150°C continuous, depending on grade) and ensure it aligns with application requirements. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical processing equipment, Electrical enclosures and assemblies, Marine and corrosive environments, Lightweight structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||