Engineered for non-conductive applications, this M8 x 11mm Nylon Hex Head Cap Screw offers excellent corrosion resistance and a wide operating temperature range.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M8 |
| Length | 11mm |
| Head Width | 25mm |
Designed for demanding industrial environments, this M8 x 11mm Nylon Hex Head Cap Screw features a robust construction with a 25mm head width. Crafted from high-performance nylon, it provides superior dielectric strength, excellent chemical resistance against many acids, alkalis, and solvents, and a lightweight alternative to metal fasteners. Its inherent non-magnetic properties make it ideal for sensitive electronic assemblies and environments where EMI/RFI interference is a concern. Suitable for applications requiring insulation and protection against galvanic corrosion.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Insert the M8 Nylon Hex Head Cap Screw into the pre-drilled hole. 3. Tighten the screw using an appropriate wrench or socket, applying moderate torque suitable for nylon materials to avoid over-stressing. 4. Verify secure fastening without excessive deformation of the nylon head.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M8 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M8 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread stripping or head deformation. | Use a torque wrench and adhere to recommended torque values for nylon fasteners to prevent damage. |
| Using in applications exceeding the material's temperature or chemical resistance limits. | Consult material datasheets and application requirements to ensure compatibility. Consider higher-performance polymers if necessary. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and switchgear, Chemical processing equipment, Medical device assemblies, Corrosive or wet environments, Lightweight structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||