This M7x72mm Hex Head Cap Screw is engineered from high-performance nylon, offering superior corrosion resistance and dielectric properties. Ideal for lightweight, non-conductive fastening solutions in corrosive environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Size | M7 |
| Length | 72mm |
| Head Width | 23mm |
A high-performance industrial component, this M7x72mm Hex Head Cap Screw features a robust nylon construction, providing excellent resistance to a wide range of chemicals, solvents, and moisture. The 23mm head width ensures ample surface contact for secure assembly. Its lightweight nature and non-magnetic properties make it suitable for applications where electrical conductivity or weight is a concern. The precise M7 thread pitch guarantees reliable engagement with standard M7 nuts and tapped holes, offering a durable fastening solution for demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Manually thread the M7x72mm Nylon Hex Head Cap Screw into the receiving hole or nut until snug. 3. Using an appropriate wrench, tighten the screw to the desired torque, avoiding over-tightening to prevent thread stripping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M7 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M7 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread deformation or head stripping. | Apply torque gradually and stop once the screw is secure. Consult torque charts for nylon fasteners if specific values are required. |
| Using the nylon screw in applications exceeding its temperature or load-bearing limits. | Verify the operating temperature range and maximum tensile strength of nylon fasteners before deployment in critical applications. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and components, Medical equipment assembly, Corrosive chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||