Engineered from high-performance Titanium Grade 5, this M7x41mm hex head cap screw delivers exceptional strength and corrosion resistance for critical industrial applications. Its robust design ensures reliable fastening in challenging conditions.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Size | M7 |
| Length | 41mm |
| Head Width | 8mm |
Designed for demanding industrial environments, this M7x41mm hex head cap screw is manufactured from premium Titanium Grade 5 (Ti-6Al-4V), renowned for its outstanding strength-to-weight ratio, excellent corrosion resistance, and biocompatibility. The M7 thread pitch ensures secure engagement, while the 41mm length provides ample reach for various assembly requirements. The 8mm hex head width facilitates controlled torque application with standard tooling. This fastener is ideal for applications requiring high tensile strength, resistance to extreme temperatures, and immunity to galvanic corrosion in diverse chemical and marine settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the screw threads and the mating tapped hole or nut to remove any debris or contaminants. 2. Apply a small amount of anti-seize compound to the threads if specified for the application, avoiding over-application. 3. Thread the screw by hand to ensure proper alignment and prevent cross-threading. Use a calibrated torque wrench to tighten to the manufacturer's specified torque value, applying gradual and even pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M7 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M7 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, leading to thread stripping or fastener failure. | Always use a calibrated torque wrench and adhere to the recommended torque specifications for the material and thread size. |
| Using the wrong tool size for the hex head, resulting in cam-out and damage to the fastener head. | Ensure the correct size hex bit or wrench is used for the 8mm head width to achieve optimal engagement and torque transfer. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Chemical processing equipment, Marine hardware and offshore structures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||