Engineered from aerospace-grade Titanium Grade 5, this M7x35mm hex head cap screw offers exceptional strength-to-weight ratio and superior corrosion resistance. Its precise dimensions ensure reliable performance in critical assemblies.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Size | M7 |
| Length | 35mm |
| Head Width | 26mm |
Precision-manufactured to tight tolerances, this M7x35mm hex head cap screw utilizes Titanium Grade 5 (Ti-6Al-4V), a dual-phase alloy renowned for its excellent mechanical properties and biocompatibility. With a tensile strength exceeding 900 MPa and a density approximately 60% that of steel, it provides significant weight savings without compromising structural integrity. The inherent passivation layer of titanium renders it highly resistant to oxidation and chemical attack, making it ideal for harsh environments. The M7 thread pitch and 35mm length, coupled with a 26mm head width, conform to industry standards, ensuring compatibility with mating components and facilitating secure torque application.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the screw threads and the tapped hole/nut to remove any debris or contaminants. 2. Apply a small amount of anti-seize compound to the threads, especially in corrosive environments, to prevent galling and ensure ease of removal. 3. Thread the screw into the mating component by hand to verify proper engagement, then tighten to the specified torque using a calibrated torque wrench. Avoid over-torquing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M7 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M7 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force or over-torquing the screw. | Always use a calibrated torque wrench and adhere to the recommended torque specifications for the application to prevent thread stripping or fastener failure. |
| Failure to clean threads before installation. | Thoroughly clean both the screw threads and the mating threads to ensure smooth engagement and prevent contamination that could lead to galling. |
| Not using anti-seize in corrosive or dissimilar metal applications. | Apply a suitable anti-seize compound to the threads to prevent galling, seizing, and galvanic corrosion, especially when joining titanium to other metals. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace and aviation components, Medical implants and surgical instrumentation, Marine hardware and offshore equipment, High-performance automotive applications, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||