This M7x17mm Nylon Hex Head Cap Screw offers superior corrosion resistance and dielectric strength. Its lightweight yet robust construction makes it an ideal fastening solution for demanding environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M7 |
| Length | 17mm |
| Head Width | 13mm |
A high-performance industrial component, this M7 Hex Head Cap Screw is precision manufactured from durable Nylon. It features a nominal thread size of M7 and a length of 17mm, with a head width of 13mm for secure torque application. The inherent properties of Nylon provide excellent resistance to a wide range of chemicals, solvents, and moisture, along with superior electrical insulation. This makes it a critical fastener for applications where galvanic corrosion is a concern or where electrical conductivity must be avoided. Its lightweight nature also contributes to reduced overall assembly weight.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating hole is clean and free of debris. 2. Thread the Nylon Hex Head Cap Screw into the designated receiving component by hand to prevent cross-threading. 3. Tighten with an appropriate wrench or socket to the recommended torque specification, avoiding over-tightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M7 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M7 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the Nylon screw, leading to thread stripping or head breakage. | Refer to torque charts for Nylon fasteners and use a torque-limiting driver for precise application. |
| Using a metal tool that can damage the Nylon head. | Employ tools with plastic or coated tips, or ensure the tool is properly sized to avoid slippage and damage. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosure assembly, Automotive interior components, Marine equipment and fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||