Engineered for superior performance, these M7x16mm Grade 5 Titanium Hex Cap Screws offer exceptional strength-to-weight ratio and unmatched corrosion resistance. Ideal for critical applications where reliability is paramount.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Size | M7 |
| Length | 16mm |
| Head Width | 12mm |
Trusted by engineers across multiple sectors, these M7x16mm Hex Cap Screws are manufactured from premium Titanium Grade 5 (Ti-6Al-4V), a dual-phase alloy renowned for its high tensile strength (950 MPa min), excellent fatigue resistance, and superior corrosion immunity in aggressive environments. With a nominal head width of 12mm, they provide ample torque transfer for secure assembly. Their inherent lightweight nature makes them indispensable in aerospace, marine, and high-performance automotive applications, as well as medical implants and chemical processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Apply a suitable thread lubricant or anti-seize compound if recommended for the application. 3. Tighten the hex head cap screw to the specified torque using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M7 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M7 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, leading to thread stripping or material fatigue. | Always adhere to the recommended torque specifications for the specific application and material. |
| Using improper tools that can damage the hex head or the fastener. | Utilize appropriately sized and high-quality hex drivers or wrenches to ensure proper engagement and prevent cam-out. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and fittings, High-performance automotive assemblies, Medical implants and surgical instruments, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||