Engineered from high-performance polycarbonate, this M7x132mm hex head cap screw offers exceptional impact resistance and chemical inertness. Its robust design ensures secure fastening in demanding environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Size | M7 |
| Length | 132mm |
| Head Width | 10mm |
Precision-manufactured to tight tolerances, this M7x132mm hex head cap screw features a nominal diameter of M7 and a total length of 132mm. The head exhibits a width of 10mm, facilitating standard tool engagement. Constructed from premium-grade polycarbonate, it provides superior tensile strength, excellent dielectric properties, and significant resistance to a broad spectrum of chemicals and UV radiation. This material selection makes it an ideal choice for applications requiring non-conductivity, weight reduction, or operation in corrosive atmospheres where traditional metal fasteners would degrade.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench or socket that fits the 10mm hex head. 2. Align the screw with the pre-drilled or tapped hole. 3. Hand-tighten the screw initially to ensure proper thread engagement and prevent cross-threading. 4. Use the wrench or socket to tighten the screw to the required torque, avoiding over-tightening to prevent potential damage to the polycarbonate material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M7 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M7 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, leading to cracking or stripping of the polycarbonate threads. | Use a calibrated torque wrench set to the manufacturer's recommended torque specifications for polycarbonate fasteners. Hand-tighten first and then apply final torque gradually. |
| Using metal tools that can scratch or damage the polycarbonate head. | Ensure tools are clean and free from debris. If possible, use tools with protective coatings or exercise caution to avoid marring the screw head. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and insulation, Medical equipment assembly, Corrosion-resistant structural components, Lightweight industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||