This M7x106mm Nylon Hex Head Cap Screw offers superior corrosion resistance and a lightweight design. Its robust construction ensures reliable fastening in diverse industrial and commercial applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Size | M7 |
| Length | 106mm |
| Head Width | 33mm |
Engineered for reliability and performance, this M7x106mm Hex Head Cap Screw is manufactured from high-grade Nylon. Its dimensions include a nominal thread size of M7, a substantial length of 106mm, and a generous 33mm head width, providing excellent clamping force and surface contact. Nylon's inherent properties of electrical insulation, chemical resistance, and low friction make this fastener ideal for environments where metal corrosion is a concern or where electrical isolation is required, such as in sensitive electronic assemblies or marine applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate tool (e.g., metric wrench or socket) that fits the 33mm hex head. 2. Thread the M7 screw into the receiving tapped hole or nut, ensuring smooth engagement of the nylon threads. 3. Tighten to the desired torque, avoiding over-tightening which could strip the nylon threads or damage the workpiece.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M7 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M7 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive torque, leading to stripped nylon threads. | Refer to torque charts for nylon fasteners or use a torque-limiting driver for precise tightening. |
| Assuming metal fastener torque values are applicable. | Nylon fasteners have lower tensile strength and require significantly less torque than their metal counterparts. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and equipment, Marine and offshore installations, Chemical processing equipment, Automotive sub-assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||