This M7 x 101mm Hex Head Cap Screw, crafted from high-strength Aluminum 6061, offers exceptional corrosion resistance and a superior strength-to-weight ratio for demanding applications.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Size | M7 |
| Length | 101mm |
| Head Width | 26mm |
Engineered for reliability and performance, this M7 hex head cap screw features a nominal diameter of 7mm and an overall length of 101mm. The head width measures 26mm, providing ample surface area for torque application. Manufactured from Aluminum 6061, it exhibits excellent machinability and a tensile strength suitable for many structural and mechanical assemblies where weight reduction is critical. Its inherent corrosion resistance makes it ideal for environments prone to moisture and mild chemical exposure, ensuring long-term structural integrity and performance in aerospace, automotive, and marine sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Hand-tighten the screw to start the engagement, verifying proper thread alignment. 3. Using an appropriate size hex wrench or socket, torque the screw to the manufacturer's specified value, avoiding over-tightening to prevent thread stripping or material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M7 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M7 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force leading to thread stripping, especially in softer aluminum materials. | Always adhere to recommended torque specifications and use a calibrated torque wrench. Consider thread lubricant if specified for the application. |
| Incorrectly matching screw size and thread pitch to the receiving component. | Verify the M7 designation and ensure compatibility with the tapped hole or nut. Consult engineering drawings for precise specifications. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Automotive interior and exterior trim, Lightweight marine hardware assemblies, Electronics enclosures and chassis, Prototyping and custom fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||