This M7 x 83mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and dielectric properties. Its robust nylon construction ensures reliability in harsh industrial environments, providing a secure and long-lasting fastening solution.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M7 |
| Length | 83mm |
| Head Width | 19mm |
A high-performance industrial component, this M7 x 83mm Hex Head Cap Screw is manufactured from high-density nylon, offering superior resistance to a wide range of chemicals, solvents, and moisture. The M7 thread size ensures compatibility with standard metric M7 tapped holes, while the 83mm length provides significant grip. The 19mm hex head width facilitates engagement with standard tools for consistent torque application. This material is non-conductive, making it ideal for applications where electrical insulation is critical. Its lightweight nature also contributes to reduced assembly weight.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Hand-thread the cap screw to engage initial threads. 3. Tighten using an appropriate wrench or socket to the recommended torque specification, avoiding over-tightening to prevent thread stripping or material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M7 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M7 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive torque, leading to thread stripping or damage to the nylon material. | Refer to torque charts for nylon fasteners or apply a calibrated torque wrench to ensure proper tension without damaging the screw or workpiece. |
| Exposing the nylon screw to temperatures exceeding its operational limit. | Verify the maximum operating temperature of the nylon material and ensure the application environment remains within these parameters. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Chemical processing equipment, Corrosive marine environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||