This M7 x 59mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and dielectric properties. Engineered from high-strength polymer, it provides a lightweight yet robust fastening solution for diverse industrial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Size | M7 |
| Length | 59mm |
| Head Width | 9mm |
A high-performance industrial component, this M7 x 59mm Hex Head Cap Screw is manufactured from advanced Nylon, renowned for its excellent tensile strength, chemical resistance, and non-conductive properties. The precise M7 thread size ensures secure engagement with standard M7 nuts and tapped holes, while the 59mm length provides ample grip for joining components. The 9mm hexagonal head offers controlled torque application using standard M7 hex tools, minimizing the risk of over-tightening and material damage. Its inherent lightweight nature and resistance to environmental degradation make it ideal for applications where metal fasteners are unsuitable due to corrosion, electrical conductivity, or weight constraints.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate M7 hex driver or wrench for the 9mm head width. 2. Align the screw with the pre-drilled or tapped hole. 3. Hand-tighten initially to ensure proper thread engagement. 4. Apply torque gradually until snug, avoiding over-tightening to prevent material stripping or deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M7 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M7 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during tightening, leading to thread stripping or head fracture. | Apply torque gradually and use a calibrated torque wrench if critical. Refer to material datasheets for maximum recommended torque values. |
| Incorrect tool size, potentially damaging the hex head or failing to achieve proper engagement. | Ensure the hex driver or wrench is precisely sized for the 9mm head width to prevent slippage and damage. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Corrosive chemical processing equipment, Lightweight assembly in automotive and aerospace, Medical device manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||