This M7 x 35mm hex head cap screw is manufactured from high-grade 304 stainless steel, offering exceptional corrosion resistance. Its robust design ensures reliable and secure fastening for demanding applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Size | M7 |
| Length | 35mm |
| Head Width | 23mm |
Engineered for reliability and performance, this M7 x 35mm hex head cap screw is constructed from premium 304 stainless steel, renowned for its superior tensile strength and excellent resistance to corrosion and oxidation, making it suitable for harsh environments. The M7 thread standard ensures precise engagement with corresponding nuts and tapped holes. With a length of 35mm and a substantial head width of 23mm, this fastener provides ample bearing surface and torque transfer capability for secure and stable assemblies. Ideal for structural connections, machinery, and outdoor equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Thread the M7 hex head cap screw into the pre-tapped hole or through the components. 3. Tighten using an appropriate wrench to the recommended torque specification for the application, ensuring a secure and stable connection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M7 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M7 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard steel screw in corrosive environments, leading to premature rust and failure. | Always select 304 stainless steel fasteners for applications exposed to moisture, chemicals, or saltwater to ensure longevity and structural integrity. |
| Over-tightening the screw, which can strip threads or compromise the material's integrity. | Refer to torque charts and use a calibrated torque wrench to apply the correct tightening force, preventing damage to the screw and mating components. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Marine hardware and equipment, Automotive and aerospace components, Industrial machinery and fabrication, Outdoor structures and fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||