Experience superior non-corrosive fastening with our M7 x 30mm Nylon Hex Head Cap Screws. Engineered for lightweight, electrical insulation, and chemical resistance, these fasteners offer a reliable solution for diverse industrial and electronic applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Size | M7 |
| Length | 30mm |
| Head Width | 18mm |
Manufactured under strict quality controls, these M7 x 30mm Hex Head Cap Screws are precision-molded from high-performance nylon. The material exhibits excellent dielectric strength, low friction, and robust resistance to a wide range of chemicals and solvents, making it ideal for environments where corrosion or electrical conductivity are concerns. The 18mm head width ensures effective torque application with standard tooling, while the M7 thread size and 30mm length provide secure and consistent engagement in pre-tapped holes or with mating components. Tolerance specifications adhere to industry standards for reliable fit and performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating component with an M7 threaded hole or nut. 2. Insert the Nylon Hex Head Cap Screw and begin threading by hand to prevent cross-threading. 3. Tighten the screw using a standard wrench or socket, applying moderate torque to achieve a secure fit without over-stressing the nylon material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M7 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M7 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to stripping of threads or material deformation. | Apply moderate torque. Nylon screws are not designed for high-tension applications; use torque limiting tools if precise tension is critical. |
| Using metal tools that can scratch or damage the nylon head, reducing its aesthetic appeal or grip. | Employ tools with nylon or composite heads, or use protective sleeves on metal tools. Clean tools regularly to remove metal debris. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and components, Medical equipment assembly, Corrosive chemical processing environments, Lightweight structural applications, Automotive interior fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||