This M7 x 126mm Nylon Hex Head Cap Screw offers superior corrosion resistance and electrical insulation. Its robust nylon construction provides a lightweight yet strong fastening solution for diverse industrial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M7 |
| Length | 126mm |
| Head Width | 17mm |
Engineered for reliability and performance, this M7 x 126mm hex head cap screw is manufactured from high-grade nylon, offering excellent dielectric strength and resistance to chemicals and UV radiation. The M7 thread size ensures compatibility with standard metric components, while the 126mm length provides ample reach for various assemblies. The 17mm hex head width allows for secure torque application with standard tooling, making it ideal for applications where metal fasteners are unsuitable due to conductivity, weight, or corrosive conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate socket or wrench for the 17mm hex head. 2. Thread the M7 x 126mm nylon cap screw into the pre-tapped hole or mating nut. 3. Tighten to the recommended torque specification, avoiding over-tightening to prevent stripping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M7 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M7 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening nylon screws | Use a torque wrench and adhere to recommended torque values to prevent thread stripping or material deformation. |
| Using in high-temperature environments | Verify the operating temperature range of the nylon material; consider higher-performance polymers if exceeding limits. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and assemblies, Marine and chemical processing equipment, Lightweight structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||