This M7 x 117mm brass hex head cap screw offers superior corrosion resistance and a distinct aesthetic. Engineered for precise engagement, it ensures secure and lasting fastening in a variety of environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Size | M7 |
| Length | 117mm |
| Head Width | 10mm |
Engineered for reliability and performance, this M7 hex head cap screw boasts a nominal diameter of 7mm and an overall length of 117mm. The head width measures 10mm, providing ample torque application with standard tooling. Fabricated from high-quality brass, it exhibits excellent machinability, inherent corrosion resistance against many common chemicals and atmospheric conditions, and non-magnetic properties. The ductility of brass allows for slight deformation without fracture, making it suitable for applications requiring vibration dampening. Its inherent aesthetic appeal makes it a preferred choice for visible assemblies and decorative hardware.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench or socket to fit the 10mm hex head. 2. Ensure the mating threads are clean and free from debris. 3. Hand-thread the screw to confirm proper engagement before applying torque. 4. Tighten to the required torque specification, avoiding over-tightening to prevent thread stripping or material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M7 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M7 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force, leading to thread galling or stripping, especially in softer materials. | Apply torque gradually and use a torque wrench to adhere to recommended tightening specifications. Ensure proper thread alignment before tightening. |
| Using the wrong size tool on the hex head, causing damage and making removal difficult. | Always use a correctly sized metric wrench or socket that fully engages the hex head to prevent slippage and damage. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Decorative hardware and fixtures, Marine and coastal environments, Electrical and electronic assemblies, Plumbing and HVAC components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||