Engineered for superior performance and durability, this M7 x 105mm hex head cap screw is manufactured from high-grade 304 stainless steel, offering exceptional corrosion resistance and strength for critical fastening needs.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Size | M7 |
| Length | 105mm |
| Head Width | 13mm |
Built to exacting engineering tolerances, this M7 x 105mm hex head cap screw features a nominal diameter of 7mm and a substantial 105mm length. The head boasts a 13mm width across flats, ensuring robust torque application. Constructed from premium 304 stainless steel, it provides excellent resistance to a wide range of corrosive environments, including atmospheric, food, and industrial chemicals, making it ideal for marine, food processing, and outdoor applications where rust and degradation are primary concerns. Its inherent tensile strength ensures reliable load-bearing capacity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench or socket matching the 13mm hex head width. 2. Insert the cap screw into the pre-drilled and tapped hole or through the components to be joined. 3. Apply consistent torque to achieve the required clamping force, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M7 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M7 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size wrench, leading to stripped hex head. | Always use a wrench or socket precisely sized to the 13mm head width to prevent damage and ensure proper torque transfer. |
| Applying excessive torque, potentially damaging the threads or the fastened material. | Refer to application-specific torque specifications or use a calibrated torque wrench to achieve the recommended clamping force without overstressing the components. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Marine hardware and fixtures, Food processing equipment assembly, Outdoor structural components, Chemical processing plants.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||