Engineered for demanding industrial applications, this M7 x 104mm Nylon Hex Head Cap Screw offers superior corrosion resistance and electrical insulation. Its robust nylon construction ensures reliable performance in challenging environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Size | M7 |
| Length | 104mm |
| Head Width | 34mm |
A proven choice for industrial professionals, this M7 x 104mm Nylon Hex Head Cap Screw is manufactured from high-strength, chemically resistant nylon. The M7 thread pitch and 104mm length provide robust fastening capabilities, while the 34mm head width ensures secure seating and torque application. Nylon's inherent non-conductive properties make it ideal for electrical assemblies and environments where galvanic corrosion is a concern. Its lightweight nature also contributes to easier handling and installation in diverse industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating component with an M7 tapped hole or nut. 2. Insert the Hex Head Cap Screw through the components to be joined. 3. Tighten the screw using a suitable wrench until secure, avoiding overtightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M7 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M7 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nylon screw, which can strip the threads or deform the head. | Apply moderate torque and use a torque wrench if precise specifications are required. Stop tightening once snug to avoid damage. |
| Using the screw in high-temperature environments exceeding the material's thermal limits. | Consult the nylon material's datasheet for temperature resistance and select an alternative fastener if the operating temperature is too high. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Chemical processing equipment, Marine and offshore installations.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||