Engineered for reliable fastening, these M7 x 101mm brass hex head cap screws provide excellent corrosion resistance and moderate strength for diverse industrial applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Size | M7 |
| Length | 101mm |
| Head Width | 14mm |
Designed for demanding industrial environments, this M7 x 101mm hex head cap screw is manufactured from high-grade brass, offering superior resistance to corrosion and chemical attack. The M7 thread ensures secure engagement in pre-tapped holes or with M7 nuts, while the 101mm length provides ample reach for joining components. The 14mm hex head allows for secure torque application using standard wrenches or sockets, preventing stripping and ensuring a reliable connection. Brass's inherent non-sparking properties make it suitable for hazardous environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate M7 tapped hole or nut for the 101mm screw. 2. Insert the screw, ensuring thread alignment. 3. Tighten the screw using a 14mm hex wrench or socket to the required torque, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M7 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M7 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a metric screw in an imperial system without proper conversion. | Ensure the mating component's thread specifications match the M7 standard for a secure fit. |
| Applying excessive torque, which can lead to thread stripping or screw breakage. | Use a torque wrench to tighten the screw to the manufacturer's recommended torque specification for brass fasteners. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Electrical and electronic enclosures, Corrosive chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||