This M6x95mm Hex Head Cap Screw, crafted from robust polycarbonate, offers exceptional chemical resistance and non-conductive properties. Its lightweight design ensures ease of handling and installation in a variety of environments.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Size | M6 |
| Length | 95mm |
| Head Width | 14mm |
Engineered for reliability and performance, this M6x95mm Hex Head Cap Screw features a 14mm head width for secure torque application. Manufactured from high-strength polycarbonate, it exhibits superior resistance to a wide range of chemicals, solvents, and UV degradation, making it ideal for corrosive environments or applications requiring electrical insulation. Its inherent toughness and impact resistance ensure long-term structural integrity. The precise M6 thread pitch guarantees consistent and dependable fastening in pre-tapped holes or with corresponding nuts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface and threaded hole are clean and free of debris. 2. Hand-thread the M6x95mm polycarbonate cap screw into the designated fastener location. 3. Tighten the screw using an appropriate wrench or socket, applying torque gradually until the desired clamping force is achieved, avoiding over-tightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening leading to stripping or cracking of the polycarbonate threads. | Utilize a torque wrench set to the manufacturer's recommended torque specification for polycarbonate fasteners to prevent over-stressing the material. |
| Using the wrong tool size, potentially damaging the hex head. | Always use a correctly sized hex socket or wrench that fits snugly onto the 14mm head width to ensure proper engagement and prevent cam-out. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and equipment mounting, Corrosive chemical processing environments, Medical device assembly, Food and beverage processing equipment, Marine and outdoor applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||