Engineered for reliability in corrosive environments, this M6x76mm Nylon Hex Head Cap Screw offers exceptional strength and chemical resistance. Ideal for applications where metal fasteners are unsuitable.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M6 |
| Length | 76mm |
| Head Width | 14mm |
Purpose-built for heavy-duty applications, this M6x76mm Nylon Hex Head Cap Screw is manufactured from high-performance polyamide, offering superior resistance to a wide range of chemicals, solvents, and corrosive agents. Its non-magnetic and electrically insulating properties make it an excellent choice for sensitive electronic assemblies and environments where sparking is a concern. With a nominal diameter of M6, a length of 76mm, and a head width of 14mm, it provides robust mechanical fastening with reduced weight compared to traditional metal fasteners. The hex head design ensures secure torque application with standard tooling, facilitating efficient assembly and maintenance in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating component with a pre-tapped hole or nut. 2. Insert the M6x76mm Nylon Hex Head Cap Screw through the components to be joined. 3. Tighten the screw using a hex driver or wrench until secure, avoiding over-tightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to stripping or cracking of the threads. | Use a torque wrench set to the recommended torque for nylon fasteners or tighten until snug and then an additional quarter turn. |
| Using the screw in an application exceeding its tensile or shear strength limits. | Consult the material's datasheet for load-bearing capacities and ensure it meets or exceeds the application's requirements. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical processing equipment, Electrical enclosures and panels, Marine and offshore installations, Medical device assembly.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||