Engineered from aerospace-grade Titanium Grade 5, this M6x57mm hex cap screw offers exceptional strength-to-weight ratio and superior corrosion resistance for critical applications.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Size | M6 |
| Length | 57mm |
| Head Width | 22mm |
Manufactured under strict quality controls, this M6x57mm Titanium Grade 5 hex head cap screw boasts a nominal diameter of M6, a total length of 57mm, and a hex head width of 22mm. Titanium Grade 5 alloy provides a minimum tensile strength of 895 MPa and excellent fatigue resistance, making it ideal for environments prone to corrosion or requiring high performance under stress. Its low density (approx. 4.5 g/cm³) contributes to weight reduction in assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-tighten the screw to confirm proper thread engagement. 3. Use a calibrated torque wrench to tighten to the specified torque value for the application, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the fastener, which can lead to thread stripping or material fatigue. | Always use a calibrated torque wrench and adhere to recommended torque specifications for the specific application and mating material. |
| Using standard steel tools which can gall or damage the titanium threads. | Utilize tools specifically designed for working with titanium or coated tools to prevent galling. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive and marine applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||