This M6 x 52mm hex head cap screw, crafted from robust carbon steel, offers superior tensile strength and durability for critical fastening applications. Engineered for reliability under demanding conditions.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Size | M6 |
| Length | 52mm |
| Head Width | 32mm |
Specified by design engineers worldwide, this M6 x 52mm hex head cap screw is manufactured from high-grade carbon steel, ensuring exceptional tensile strength and shear resistance. The nominal diameter of M6, coupled with a 52mm length, makes it suitable for medium-duty to heavy-duty applications requiring secure and permanent connections. The substantial 32mm head width provides a broad bearing surface, distributing load effectively and preventing damage to mating materials. Its inherent hardness and resistance to deformation make it a preferred choice in construction, automotive assembly, and machinery manufacturing where consistent performance is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate socket or wrench size to fit the hex head. 2. Clean the threaded hole and the screw threads to ensure a smooth engagement. 3. Insert the screw into the designated hole and begin threading by hand to prevent cross-threading. 4. Tighten the screw to the specified torque using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size wrench, leading to stripping the hex head. | Always use a properly sized socket or wrench that fits snugly on the hex head. |
| Over-tightening the screw, causing thread damage or material deformation. | Adhere to the manufacturer's recommended torque specifications, using a calibrated torque wrench. |
| Cross-threading the screw by forcing it into the hole at an angle. | Start threading the screw by hand for the first few turns to ensure proper alignment before using a tool. |
A: This Hex Head Cap Screw, Carbon Steel is manufactured from Carbon Steel.
A: Structural assembly in machinery and equipment, Automotive component mounting, General construction and framework.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||